- Designed to fit onto most reciprocating equipment

- The top of the box pivots up to 1.5 degrees to help eliminate misalignment caused by the polished rod or pumping unit

- High temp packing rated to 300°C

- Competitive alternative to other stroker stuffing boxes on the market

- Prevents well contamination from broken polished rods by a spring loaded flapper valve closing and sealing off a fluid blow out

-Designed to eliminate pulsating and vibrations carried through the surface equipment, resulting in longer life expectancy
-The bear claw consists of 2 support arms that fasten the drivehead or stuffing box together with a large grounded base. Support arms are adjusted to the correct load, which results in eliminating the pulsating and vibrations in the equipment.

-Designed to reposition a stuffing box's static seal on a polished rod safely without the use of a flush-by
-The spacer will lift the stuffing box and drivehead upward on a clamped polished rod by 2-1/8”.
-Consists of the actual spacer ring, 2 new R-31 ring gaskets, 9” studs, and replacement nuts

-Designed to safely secure the polished rod from rotating or moving axially
-Designed to seal off the well bore (BOP)
-Allows producers to service their wells without the use of a service rig, which reduces downtime and service costs
-Increases safety against uncontrolled and unexpected rod-string rotation
-

-Uses the skid’s hydraulic system flow rate to calculate the driveheads rotational speed
-Extremely accurate and accounts for hydraulic system efficiencies
-Rotational speed (RPM) is displayed clearly on a large digital screen that can be mounted wherever the customer would prefer
-Turbine flow meter accurately measures the flow rate of even the largest hydraulic systems on the market

-Lock out against unexpected rod-string rotation on driveheads so service crews can perform work under safe conditions
-Brightling Equipment Ltd. has multiple designs to fit nearly every style of drivehead

-Fastens a 6-bolt to the drivehead mainshaft so the polished rod is unable to eject when a rod-string breaks
-Brightling Equipment Ltd. has multiple designs to fit nearly every style of drivehead

-Eliminate stuffing box spilling production fluid onto the ground
-Many different sizes and options available like fail detection, fluid containers, remote lubrication, high temp, etc

-Eliminate stuffing box spills
-Available as a pressure switch, pressure gauge, or moisture sensor
-Designed to shut down the oil well when stuffing box failure is detected
-Eliminate any production fluid reaching the outdoor elements

-Eliminate the need to grease your mechanical equipment with this auto greaser
-Set desired lubrication amount and frequency, and let the auto-luber do the rest!

Model T312-V3 5.7L Engine Mount Glycol Pump Kit

- Pump is driven off of the crankshaft of the 5.7L engine eliminating the need for high maintenance, unreliable 12V DC motors
- Kits include all components and hardware needed to mount on to a 5.7L GM Engine. Animation shows basic set up and attached PDF has the BOM included
- Reliable internal gear pump, commonly used in the industry, 1/2" NPT inlet and outlet, rated up to 3 USGPM and 150 PSI. Built in adjustable pressure relief valve
- This is the low volume version, also available in a 1" HD26 high volume model (Up to 5 USGPM - 150PSI).
- Specialty electromagnet clutch kits available to allow pump to be turned on and off as needed with a 12V DC power source, these are made to order and require longer lead time. Picture of belt clutch attached.

-Custom made complete transfer pump assemblies for your disposal site
-The complete package including the drivehead, pump, framework & plumbing
-Ask about our top mount stuffing box design to decrease maintenance & down time!

-Avoid washing out soil from water pumps, help evaporate and reduce road dust with these sprinkler units
-Can be plumbed for a single unit, or used with a tee fitting to run in series

-Avoid ground disturbance permits with these sign posts with their 11 inch deep anchors

-Ensure your equipment won’t be tampered with or stolen with lock boxes. We can custom design for any equipment on the market

-We can supply engineering and custom guards for any equipment on the market